What Does EQ Stand For In Music? & The Basics Of EQ For Mixing Your Own Songs

April 6, 2017 By Liam Duncan

Recently, we’ve been covering some of the software and hardware needed to start recording and mixing your own demos and songs. If you’ve been digging into home recordings, you may have already started to fiddle around with plug-ins .

Plug-ins are everyone’s favorite/least favorite piece of gear. On the one hand, buying nice plug-ins is both tempting and addicting . On the other hand, so much can be accomplished with the stock plug-ins you’ll find on every DAW.

For example, EQ and compression are by far the two most powerful plug-ins in your arsenal. They are also included in literally every DAW ever. The difference between the stock EQs are negligible and the difference in compressors  won’t be useful to  you until you’ve mastered  the stock compressors.

Admittedly, learning to use EQ is not terribly exciting- initially that is. It can seem fairly tedious and the changes are subtle. However, the  more you experiment with it, the  more exciting it becomes.

Subtle EQ changes have incredible effects on an entire mix. Let’s learn the basics of harnessing this  power. 

Within a track, you have a broad range of audible frequencies. Using EQ, you can turn up or down a specific frequency within a track. Often, the mere act of turning down a bad sounding frequency by 3 db can make the  entire track shine.

Basically, you’ll boost and cut your tracks until you achieve the proper balance within your individual tracks. Eventually each track will individually feature the wanted frequencies.

What Can You Do With It?

What you may notice, is that a bunch of tracks that sound great individually, don’t sound very good when they’re put togethe r. Especially on tracks that are not professionally recorded, you’ll notice that the more you add, the  worse it gets.

Often a bass track will have too much of a certain frequency, and end up completely masking the kick drum. This can be a frustrating problem, because the  kick and bass may sound great on their own, but  don’t achieve the  desired  result together.

By altering the kick drum EQ, you can find the frequency at which the kick sounds best. For example, you might find the 80 hz, 200 hz, and 1950 hz all sound great. Then, get into your bass EQ, and put a notch in those frequencies so it isn’t competing with the  same space as the  kick.

Suddenly, if your tracks are balanced properly, you’ll hear the kick jumping out. Unmasking the desirable frequencies in every instrument is one of the  primary uses of EQ.

You can clear up a muddy vocal, make a snare  sound fat, and give an acoustic  guitar  track life all with  subtle  EQ moves.

The weird thing is, these moves on their own are barely noticeable. When you first start using EQ, your moves will be way too big. They’ll sometimes be wrong. Learning how to use EQ properly takes time and practice .

Let’s dive into the nitty gritty of EQ.

What Is Frequency?

This knob allows you to select a frequency to turn up or down. Basically, when you turn the frequency knob, the little dot on the  EQ line will move left or right. This is how you find the frequency you want to edit.

Simply doing this will not actually change the sound at all. Rather, it simply points to the frequency that you’ll eventually be altering.

What Is Gain?

Using the gain knob, you can turn a frequency up or down. The gain knob will show you how much you’re changing the loudness of the  frequency. It can be as subtle as 0.5 db, or as obvious as 10 db.

Gain is just a volume knob for frequencies. Often, it’s useful to turn up the gain by +5 db, and then move the frequency knob around searching for the bad/good frequency you want to edit. Once you find it, you can adjust the gain until you’ve reached a net positive outcome on the track.

What Is Q?

Q is a confusing name for a somewhat confusing mathematical principle that determines the width of your boost or cut. When you see Q, think “width”.

Once you’ve found the frequency in question, determined the proper amount of gain, you will next start dialing in the  Q value to obtain the perfect EQ move.

Different EQ Types

On most EQ plug-ins, you’ll have a few different types of EQs to choose from. The most common will be bells and notches. When you boost a frequency, you’re  making a little bell shaped movement. When you cut,  you’re making a notch in the frequency.

However, on the high and low end of your EQ, you’ll find another option: shelves. This means that instead of coming up and coming back down (like a bell) the  shelf goes up, and then extends to the left or right forever.

Shelves are often used to open up the top end of a track consistently and naturally. However, you should be careful using shelves, because if you’re using them too consistently over many tracks it can start to become obvious.

Often, finding frequencies to cut in the lower end of a track can be a better way of opening up the top end.

About The Author Henry

comments (0)

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>